Advertisement
Vitogas 100, GS10
System power switch
I = Power on
O = Power off
For burner status indication
reference applicable Vitotronic
control manual.
VIEßMANN
VITOGAS 100
Front view
Rear view
Safety switches
Blocked vent safety switch
The manual reset blocked vent safety
switch is located at the back of the
boiler in the draft hood. In the event of
complete vent blockage by snow, ice,
debris, animals' nests or other material,
the spill switch heats up and interrupts
24V to the gas control, thereby
shutting down the burner. Do not
attempt to reset the switch - call a
qualified heating contractor. If the
switch activates, the vent system must
be checked inside and out. The
blockage must be removed by the
heating contractor before the boiler is
put back into operation. Do not operate
the boiler without the blocked vent
safety switch being fully operational.
Operating Instructions
Pressure gage
Fuel
This boiler is factory calibrated for use
only with the fuel stated on the boiler
rating plate.
Boiler is factory supplied for use with one
fuel only (natural gas or propane).
WARNING
Do not use propane gas on a boiler
equipped for use with natural gas.
Do not use natural gas on a boiler
equipped for use with propane gas.
IMPORTANT
Do not attempt to operate the boiler
without the blocked vent safety switch
being fully operational. Advise the
system operator/ultimate owner to
contact a qualified heating contractor
for service immediately should the
switch activate.
WARNING
Do not bypass this safety device.
5
Advertisement
