Zanussi FCS 920 C User Manual page 6

Programme selector dial and
9
ON/OFF switch
Table of Symbols
= Delay start
=Prewash
= Quick
= Super Rinse
= Start/Pause
= Washing
Functions
Delay Start (button 2)
By selecting this option it is possible to delay the starting
of the washing programme by 6 or 3 hours. The selected
delay is indicated by the illumination of the corresponding
light.
Prewash (button 3)
If the laundry is heavily soiled, you can choose a pro-
gramme with prewash. Before the main wash the machine
runs a prewash up to 30° C. The washing time will be
prolonged approx. 20 minutes. The prewash ends with a
short spin in the programmes for cotton and synthetic
laundry. In the programme for delicate laundry the water is
only drained.
Quick (button 4)
Short programme for lightly soiled white-/coloured and
synthetic laundry. The washing time will be reduced ap-
prox. 10 minutes. Max. recommended temperature 60°C.
These option can not be chosen together with the
economy programme 60E and 40E. The washing
time will be reduced depending on the type of material
and the selected temperature. Recommended load for cot-
ton is 2 kg.
Super Rinse (button 5)
The machine performs 2 additional rinses during the
washing cycle. This option is recommended for people
who are allergic to detergents, and in areas where the wa-
ter is very soft.
Rinse hold or No spin (8)
6
• The programme selector dial allows to select a programme and/or to reset,
cancel the programme, switch the machine on/off.
• Programme selector dial is divided into following sections: Cotton, Syn-
thetic, Delicate, Wool, Special programmes. It can be turned either clock-
wise or anticlockwise.
= Rinses
= Spin
= Cycle End
= Door Locked
= Rinse Hold
= No Spin
Rinse hold
By selecting this position the water of the last rinse is not
emptied out to prevent the fabrics from creasing. When
the programme has finished, the lights "End" and "Door"
are lit to indicate that the water must be emptied out (See:
" At the end of the programme").
No spin
By selecting this position all the spinning phases are ex-
cluded. To be used for extremely delicate material. The
machine will add some additional rinses to the cotton and
synthetic programmes.
Programme progress display (7)
The light A illuminates when the machine is performing
the washing phase.
The light B illuminates when the machine is rinsing.
The light C illuminates when the machine is spinning.
The light D illuminates at the end of the washing cycle.
The light E indicates if the door can be opened:
= Drain
= Cold wash
= Wool
= Handwash
= ON/OFF
(A)
(B)
(C)
(D)
(E)