Table of Contents
Advertisement
05 Spin
06 Soil
07 Softener
08 Delay End
09 Super Speed
10 Detergent
Untitled-1 39
Press to change the spinning speed for the current cycle.
• High (Level 5): Extends the spinning process to effectively remove
moisture from the load. This level uses a stronger spinning process to
remove moisture, so it is not suitable for wrinkle-free or non-iron fabrics, or
overloads.
• (Level 4): Underwear, t-shirts, jeans, and sturdy cottons.
• (Level 3): Jeans, wrinkle-free or wash-and wear items, and synthetics.
• (Level 2): Delicate items that require a lower spinning speed.
• No Spin (Level 1): The drum does not spin after the final drain process.
Rinse hold (All indicators are off): The final rinse process is suspended so that
the laundry remains in the water. To unload the laundry, run a drain or spin
cycle.
Spin Only: To run the Spin Only cycle, press Spin for 3 seconds. When the cycle
time and spinning speed appear, press Spin repeatedly until a desired spinning
speed is selected. Then, press and hold Start/Pause (Hold to Start) to start the
cycle. The spinning time depends on the selected cycle.
Press to change the soil level for the current cycle.
• Heavy (Level 5): For extremely soiled loads.
• (Level4): For heavily soiled loads.
• (Level 3): For moderately soiled loads. This setting is best for most loads.
• (Level 2): For lightly soiled loads.
• Light (Level 1): For barely soiled loads.
The washing machine adjusts the amount of fabric softener to dispense.
NOTE
If the LED blinks, immediately refill the softener. A later refill may cause the
input level of the agent to decrease.
Set the washer to finish your wash automatically at later time. Choose a delay
of between 1 to 24 hours (in 1 hour increments). (For more information about
Delay End, see page 47.)
Press to shorten the washing time of the NORMAL, HEAVY DUTY, PET CARE
WASH or WHITES cycles. Shortened time may differ depending on the cycle,
load, and options.
The washing machine adjusts the amount of detergent to dispense.
NOTE
If the LED blinks, immediately refill the detergent. A later refill may cause the
input level of the agent to decrease.
English 39
2023-04-28
6:01:03
Advertisement
Table of Contents
