Loading
1.
Set the sampler disk with sound data into the MD280.
• Press the LOAD button of the S612.
1
2. The LOAD LED will light and loading will begin. At the same
2
time, the letter
d
on the
MIDI CH
display will appear to let
you know the S612 is being loaded from the
disk.
Also, the BUSY LED of the MD280 will light, indicating that
loading is in progress.
3.
Loading will take approximately 8 seconds. If the data has
been loaded correctly, the
MIDI CH
display will return to its
previous condition.
4.
If the data has not been loaded correctly,
E
will appear and
blink for few seconds before the
MIDI CH
display returns to
normal. If this happens, check the following:
• Has the disk been inserted correctly?
*
Is the disk blank?
• Has the disk been close to a strong magnetic field?
• Are the power and interface cables connected properly?
3
4
- - - - - - D A T A - - - - - -
EJ
I
VERIFY
I
MIDI CH
fl)
.
MIDI CH
Q
lE:J
MIDI CH
[[}
Error
-
0
-
-
•-
o/l~.
~' . :""~=-
MIDI CH
MIDI CH
[ff}
280
=