Dell D13U Service Manual page 59

Table 15. System setup options—Pre-boot Behavior menu (continued)
Pre-boot Behavior
Extend BIOS POST Time
MAC Address Pass-Through
Table 16. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
Enable Intel Virtualization Technology
(VT)
VT for Direct I/O
Table 17. System setup options—Performance menu
Performance
Multi Core Support
Active Cores
Intel SpeedStep
Enable Intel SpeedStep Technology
C-States Control
Enable C-State Control
Intel Turbo Boost Technology
Enable Intel Turbo Boost Technology
Intel Hyper-Threading Technology
Enable Intel Hyper-Threading Technology
Dynamic Tuning:Machine Learning
Enable Dynamic Tuning:Machine Learning Enables the operating system capability to enhance dynamic power tuning
Set the BIOS POST time.
By default, the 0 seconds option is enabled.
Replaces the external NIC MAC address with the selected MAC address from
the system.
By default, the System Unique MAC Address option is enabled.
Specify whether a Virtual Machine Monitor (VMM) can use the additional
hardware capabilities that are provided by Intel Virtualization Technology.
By default, the option is enabled.
Specify whether a Virtual Machine Monitor (VMM) can use the additional
hardware capabilities that are provided by Intel Virtualization Technology for
Direct I/O.
By default, the option is enabled.
Enables to change the number of CPU cores available to the operating system.
By default, the All Cores option is enabled.
Enables the system to dynamically adjust processor voltage and core
frequency, decreasing average power consumption and heat production.
By default, the option is enabled.
Enable or disable additional processor sleep states.
By default, the option is enabled.
Enable or disable Intel TurboBoost mode of the processor.
By default, the option is enabled.
Enable or disable Hyper-Threading in the processor.
By default, the option is enabled.
capabilities based on detected workloads.
By default, the option is disabled.
System setup 59