Taylor 5273275 Instructions For Use Manual page 5

How To Program Your Personal Data
1. Power On
Press the (SET) key to turn the scale on.
2. Set Memory Number
Press the s or t key to select a memory number (P1-P2). Press the
gender mode icon blinks.
3. Select Gender
Press the s or t key to choose male ( )/ female ( ). Press
blink.
4. Set Height
Press the s or t key to increase/decrease the height digits. Press the
The age digits blink.
5. Set Age
Press the s or t key to increase/decrease the age digits. Press the
8
(SET) key to confirm. A
(SET) to confirm. The height digits
(SET) key to confirm.
(SET) key to confirm.
6.
The scale shows a flash, then "0.0". The scale will automatically shut off after a few
seconds. Your personal information is saved in memory. Note: You may step on the
scale for a reading with bare feet when "0.0" appears on the screen.
Couple of Reminders...
• After you programmed your personal data into
memory the scale will recognize by your weight.
• Only reprogram if age, height, or weight has
changed (+/-6.6 lbs/3kgs).
Step On Scale With Bare Feet!
9