Table of Contents
Advertisement
Recording on an Audio Tape or DAT
I
2
3
Select the desired program source.
For an FM/AM broadcast, tune in the desired
station.
Set the tape (DAT) deck in the recording
mode.
Start the selected program source.
Note on recording
The settings of the VOLUME, SURROUND, BALANCE,
SOBSONIC, and graphic equalizer do not have any effect on
recording.
Monitoring the recorded sound
If you have connected a tape deck having separate record and
playback heads to the TAPE 2 jacks, you can monitor the
recording results. While recording or dubbing, press the
TAPE 2 MONITOR button To listen to the source sound again,
press the button again.
Note on tape dubbing
Tape dubbing is possible only in the following directions:
From
(playback side)
To
(recording side)
FUNCTION
selector
to be pressed
Tape deck connected
to TAPE 1 IN
Tape deck connected
to TAPE 2 REC OUT
DAT deck connected
to DAT REC OUT
TAPE 1
DAT deck connected
to DAT IN
Tape deck connected to
TAPE 1 or 2 REC OUT
DAT
31
Advertisement
Table of Contents
