Table of Contents
Advertisement
Recehniig Radio Broadcast Programs
Categorizing Preset Stations by Music Index
You can divide preset stations under up to eight Music Index categories (ROCK, JAZZ, ...) using the Music Index
function. When the unit is in the LINK ON state, only the stations belonging to the selected category can be
scanned by STATION SCAN. (Refer to ''Method A of Tuning Preset Stations," page 25 and "Tuning in a
Categorized Station," page 27.) Also the sound is equalized according to the equalization curve assigned to the
selected category.
SYSTEM POWER - ON
I
Select the function TUNER.
2
Press MEMORY INDEX.
The LINK and the MEMORY indicators will
appear
3 Tune in the desired preset station with
STATION SCAN + or -.
4
Assign a Music Index to the tuned in station
by pressing the corresponding EQ/MUSIC
INDEX CATEGORY button.
The box-shaped indicator for the selected Music
Index will blink.
5
Repeat Steps 3 and 4 tor all other stations
you want to assign a Music Index to.
6
Press again MEMORY INDEX.
The MEMORY indicator will disappear and the
box-shaped indicator will stop blinking.
All preset stations will remain under category OPTION-2
Until you perform the above operation.
Each station can be stored under only one category
If you store an already categorized station under any other
category, only the last selected category will be valid.
Channel numbers to be assigned to categorized stations
Serial numbers (1, 2. ...) will be assigned to the stations by
category.
The Music Index function cannot be used
• if no stations have been preset (see "Presetting Broadcast
Stations, " page 24 ), or
• when the unit is in the direct tuning mode.
26
Advertisement
Table of Contents
