Download Print this page

Ryobi PCL430 Operator's Manual page 3

18 volt oscillating multi-tool
Hide thumbs Also See for PCL430:

Advertisement

MULTI-TOOL SAFETY WARNINGS
Hold the powertoolby insulated gripping surfaces, when
will reduce the risk of electric shock, fire, or serious personal
Performing an operation where the cutting accessory
injury.
may contact hidden wiring. Cutting accessory contacting
m Do not place battery tools or their batteries near fire or
a "live" wire may make exposed metal parts of the power
heat. This will reduce the risk of explosion and possibly injury.
m Battery tools do not have to be plugged into an electrical
TU:
outlet; therefore, they are always in operating condition, — M Save these instructions. Refer to them frequently and use
Beaware
of possiblehazards whennotusingyourbattery
them to instruct others who may use this tool. if you loan
tool or when changing accessories. Following this rule
'someone this tool, loan them these instructions also.
4 — English
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
MEANING
A
Indicates a hazardous situation, which, if not avoided, will result in death or
DANGER:
À
WARNING:
.
Indicates a hazardous situation, that, if not avoided, may result in minor or
A
CAUTION:
moderate injury.
serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
(Without Safety Alert Symbol) Indicates information considered important, but
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL
DESIGNATION/EXPLANATION
Always wear eye protection with side shields marked to comply with ANSI
287.1.
This product uses lithium-ion (Li-ion) batteries. Local, state or federal laws
may prohibit disposal of batteries in ordinary trash. Consult your local waste
authority for information regarding available recycling and/or disposal options.
PRODUCT SPECIFICATIONS
Speed (OPM)...
Oscillation...
10,000-20,000/min
3 degrees
— English

Advertisement

loading