Turning Sending Program Number On And Off - Kawai PN Series Owner's Manual

4. TURNING SENDING PROGRAM NUMBER ON AND OFF
You can use 8 program numbers to transmit data of tone color. Program Number | transmits the
data of PIANO 1, Program Number 2 transmits PIANO 2, Program Number 3 transmits E.PIANO,
Program Number 6 transmits CHURCH ORGAN, Program Number 7 transmits HARPSICHORD,
Program Number 8 transmits VIBRAPHONE, Program Number 12 transmits STRINGS and Program
Number 13 transmits CHOIR.
(1) If you press any B-flat key while holding down the TOUCH and TRANSPOSE buttons, this
function is set to "off" and the PN Piano does not transmit the data corresponding to the tone
selected on the panel. If you press the B-flat key again while holding down the TOUCH and
TRANSPOSE buttons, this function returns to "on" and you can select the tone to transmit as data.
(2) Release both hands after selecting either "on" or "off" of sending program number.
When the power is first turned on, the SENDING MIDI PROGRAM NUMBER is always "on".
5. TURNING MULTITIMBRE ON AND OFF
Normally, the procedure described in the MIDI CHANNEL SELECT section is used
to transmit or receive data on only one MIDI channel (any one of | through 16). But by turning the
MULTI TIMBRE function "оп", you can receive more than one MIDI channel and simultaneously
play a different timbre on each channel. With this feature, you can use a sequencer such as the
Kawai Q-80EX or DRP-10 to create performances with contain a variety of timbres on the digital
piano. The term "Multi Timbre" is derived from this ability to play multiple timbre simultaneously.
(1) If you press any A-flat key while holding down the TOUCH and TRANSPOSE buttons, the
MIDI MULTITIMBRE will be set to "on". If you press any A-flat key again while holding down
the TOUCH and TRANSPOSE buttons, the MIDI MULTITIMBRE function returns to "off".
(2) Release both hands after selecting the desired setting.
When power is first turned on, the MIDI MULTITIMBRE setting is always off.
6. LOCAL CONTROL ON AND OFF
This mode is used to control whether or not the sound from the piano's keyboard will be heard.
(1) If you press any F-sharp key while holding down the TOUCH and TRANSPOSE
buttons, the MIDI LOCAL CONTROL will be set to "off'. If you press again any F-sharp key
while holding down the TOUCH and TRANSPOSE buttons, the MIDI LOCAL CONTROL returns
to "on".
(2) Release both hands after selecting the desired setting.
zl.