Table of Contents
Advertisement
OPERATION
PROGRAMMING
@>
REPEATING A CD (REPEAT!
• Press REPEAT (23) during playback of the CD.
- REPEAT DISC lights up; the CD will now be repeated
continuously,
• Press REPEAT twice to stop the track being repeated.
REPEATING ALL CDs (REPEAT)
• Press REPEAT (23) twice before or during playback.
- REPEAT lights up; all CDs will now be repeated continuously.
• Press REPEAT again to stop the CDs being repeated.
CALLING UP OTHER TIME INFORMATION (TIME)
• Press TIME (22) whenever you want to know the remaining
playing time of the track being played (REM TRACK TIME).
• Press TIME again if you wish to know the remaining playing
time of the entire CD (TOTAL REM TIME).
• Press TIME again if you wish to return to the elapsed playing
time indication of the current track (TRACK TIME).
INSERTING AN EXTRA PAUSE (AUTO SPACE)
• Press AUTO SPACE (9).
- AUTOSPACE lights up; during play an extra pause of 4
seconds will be inserted between the different tracks.
• Press AUTO SPACE again to delete the extra pause.
Other pause times can be entered in the PRESETS mode.
For this refer to 'PERSONAL PRESETS' on page 11.
STORING A PROGRAM (PROGRAM)
By programming the changer you can play up to 30 tracks in
any required sequence.
FULL lights up if you exceed the maximum of 30 tracks.
--
^
• In STOP mode, press P(rogram) (3) to open the memory.
- PROGRAM lights up and PROGRAM starts flashing.
• Select the number of the first required CD using DISC
SELECT (10) or DISC (on the remote control).
• Key in the required track numbers of this CD using the 0-9
digit buttons (2).
- Every track number you enter in this way will be included
immediately in the program.
- The display always shows the number of tracks in your
program.
• If you wish to store tracks from another CD, you should first
enter the number of the CD.
• Press P(rogram) (3), STOP/CP (17) or PLAY/REPLAY (18) to
•
quit the PROGRAM mode.
WRONG TRACK will light up if you select a non-existent track
number.
WRONG DISC will light up if you select a non-existent CD
number.
CHECKING THE PROGRAM (REVIEW)_
• Press REVIEW prior to, during or after programmed play.
- All CD and track numbers appear in the programmed
sequence on the display.
NO PROGRAM will light up if no track numbers have yet been
stored.
With REVIEW (13) you can proceed more rapidly to the next
block of information.
PLAYING THE PROGRAM (PLAY/REPLAY)
• Press PLAY/REPLAY (18).
- Playback starts with the first number of the program.
The EDIT (21), P(rogram) (3), C(ancel) (4), PRES(ets) (8), INFO
(5) and FTS (6) buttons cannot be used during programmed
play; search for a particular passage is only possible within the
track being played.
ERASING A PROGRAM (STOP/CP or OPEN/CLOSE)
• Press STOP/CP (17) twice or, if the CD has already stopped,
just once; you can also press OPEN/CLOSE (11)
straightaway.
- The program has now been erased.
ERASING A TRACK FROM THE PROGRAM (CANCEL)
• Press REVIEW (13) before or after programmed play (in
STOP mode).
- All CD and TRACK numbers appear in the programmed
sequence on the display.
• Press C(ancel) (4) as soon as the number you wish to erase
appears.
- The number has now been erased.
NO PROGRAM will light up if no track numbers have yet been
stored, and/or if you have not pressed REVIEW (13) first before
cancelling.
9
Advertisement
Table of Contents
