ASROCK W480M WS User Manual page 57

W480M WS
Dll Bandwidth 1
Configure Dll Bandwidth 1 (1333 MHz) to maximize the performance of intergrated
memory controller.
Dll Bandwidth 2
Configure Dll Bandwidth 2 (1600 MHz) to maximize the performance of
intergrated memory controller.
Dll Bandwidth 3
Configure Dll Bandwidth 3 (1867 MHz) to maximize the performance of intergrated
memory controller.
Advanced Setting
ASRock Timing Optimization
Configure the fast path through the MRC.
ASRock Second Timing Optimization
Configure the fast path through the MRC.
Realtime Memory Timing
Configure the realtime memory timings.
[Enabled] The system will allow performing realtime memory timing changes after
MRC_DONE.
Command Tristate
Configure the Command Tristate Support.
Exit On Failure
Configure the Exit On Failure for MRC training steps.
Reset On Training Fail
Reset system if the MRC training fails.
MRC Fast Boot
Enable Memory Fast Boot to skip DRAM memory training for booting faster.
49