Thermal Sensor Header
(3-pin TR1)
(see p.6, No. 29)
USB 3.2 Gen1 Header
(19-pin USB3_1_2)
(see p.6, No. 15)
Front VGA Header
(15-pin FRNT_VGA1)
(see p.6, No. 1)
Clear CMOS Pad
(CLRMOS1)
(see p.6, No. 28)
TR1
TR1
1
GND
IntA_PA_D+
IntA_PA_D-
GND
IntA_PA_SSTX+
IntA_PA_SSTX-
GND
IntA_PA_SSRX+
IntA_PA_SSRX-
Vbus
1
IntA_PB_SSRX-
IntA_PB_SSRX+
GND
IntA_PB_SSTX-
IntA_PBA_SSTX+
GND
IntA_PB_D-
IntA_PB_D+
Dummy
Please connect the thermal
sensor cable to either pin 1-2
or pin 2-3 and the other end to
the device which you wish to
monitor its temperature.
Besides two default USB 3.2
Gen1 ports on the I/O panel,
there is one USB 3.2 Gen1
header on this motherboard.
This USB 3.2 Gen1 header can
support two USB 3.2 Gen1
ports.
Vbus
Please connect either end
of VGA_2X8 cable to VGA
header.
1
CLRMOS1 allows you to clear
the data in CMOS. To clear
CMOS, take out the CMOS
battery and short the Clear
CMOS Pad.
W480M WS
25