Connections (Notifications); Connecting To An Antenna Or Cable - LG 32LW560H Owner's Manual

Hide thumbs Also See for 32LW560H:
Table of Contents

Advertisement

32LW560H
40LW560H
43LW560H
Model
32LW570H
40LW570H
43LW570H
VESA (A x B)
200 x 200
Standard screw M6
Number of
4
screws
Wall mount
LSW240B
bracket
MSW240
(optional)
A
B
CAUTION
• Remove the stand before installing the TV on a
wall mount by performing the stand attachment
in reverse.
NOTE
• When using the wall mounting bracket, apply
the adhesive protective label to cover the
unused stand openings. This will prevent the
accumulation of dust and dirt. (Use only when
provided with your particular model.)
Provided Item
Adhesive
protective label

Connections (Notifications)

49LW560H
You can connect various external devices to the TV.
49LW570H
Supported external devices are: HD receivers, DVD
55LW570H
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
300 x 300
more information on external device's connection,
refer to the manual provided with each device.
M6
4
• If you record a TV program on a DVD recorder or
LSW350B
MSW240
• The external device connections shown may
• Connect external devices to the TV regardless
• Refer to the external equipment's manual for
• In PC mode, there may be noise associated

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is
optional.
• Make sure not to bend the copper wire of the RF
• Complete all connections between devices, and
NOTE
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information about recording, refer to
the manual provided with the connected device.
differ slightly from illustrations in a manual.
about the order of the TV port. If you connect a
gaming device to the TV, use the cable supplied
with the gaming device.
operating instructions.
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the PICTURE menu until the picture
is clear.
CAUTION
cable.
Copper wire
then connect the power cord to the power outlet
to prevent damage to your TV.
11

Advertisement

Table of Contents
loading

Table of Contents