Pc Health Monitoring - Supermicro H8DCE-HTe User Manual

H8DCE-HTe User's Manual
1-3

PC Health Monitoring

This section describes the PC health monitoring features of the H8DCE-HTe. The
serverboard has an onboard System Hardware Monitor chip that supports PC
health monitoring.
Onboard Voltage Monitors for two CPU cores, Hyper Transport
(1.2V), two memory banks (2.5V), nVidia 2200/2050 chipset (1.5V)
The onboard voltage monitor will scan these voltages continuously. Once a voltage
becomes unstable, it will give a warning or send an error message to the screen.
Users can adjust the voltage thresholds to defi ne the sensitivity of the voltage moni-
tor. Real time readings of these voltage levels are all displayed in BIOS.
Fan Status Monitor with Firmware/Software Speed Control
The PC health monitor can check the RPM status of the cooling fans. The onboard
fans are controlled by thermal management via BIOS.
CPU Overheat/Fan Fail LED and Control
This feature is available when the user enables the CPU overheat/Fan Fail warning
function in the BIOS. This allows the user to defi ne an overheat temperature. When
this temperature is exceeded or when a fan failure occurs, then, the Overheat/Fan
Fail warning LED is triggered.
Auto-Switching Voltage Regulator for the CPU Core
The 3-phase-switching voltage regulator for the CPU core can support up to 80A and
auto-sense voltage IDs ranging from 0.875 V to 1.6V. This will allow the regulator
to run cooler and thus make the system more stable.
1-10