Kenwood TK-752 Instruction Manual page 7

or vehicle parts.
The following tools are required for installing the transceiver:
¢ 6mm (1/4") or larger electric drill
2
Drill bits (sizes listed b e
95 x 16'self-tapping screws
- @4X 16 sef-tapping screws
» g3.2mm: 8")
@ DC Power Cable Connection
IMPORTANT!
The transceiver operates in 12 V negative soit sysiems only!
m Mobile Installation
¢ Leave sufficient room at the rear of the ftreneconer for cable connections.