Technics SA-DX930 Operating Instructions Manual page 22

RQTSOIS
BAND!
-DSP ON/DEFEAT FM MODE
aa INPUT SELECTOR
(O)
Thinner
Luly
TUNING
aren ~
er. LNA I wt
oe Tre ees
HLT ie 7 |
i
Listening fo radio broadcasts
Use the tuning buttons to tune-in radio stations.
Turn [INPUT SELECTOR] to select "TUNER."
Press [BAND] to select "FM" or "AM."
Press [TUNING (\V or / )] to tune to the
desired frequency.
"TUNED" lights up when tuned.
"STEREO" lights up when an FM stereo broadcast is
received,
To make an automatic search for stations
If [TUNING (Vv or A)) is held down for an instant until the
frequency begins to scroll, the broadcast stations are tuned
in automatically when one is found.
Tuning may
encountered.
stop automatically if any jamming is
If noise is excessive in the FM stereo mode
Press [FM MODE].
("STEREO" will go out, and "MONO" will light up.)
The broadcast will be monaural, but noise will be reduced.
If the button is pressed once more, the stereo mode resumes.
If there is hissing or thumping while the radio is
playing
Press and hold [~DSP ON/DEFEAT] to select "DEFEAT."
(= Page 30 for details about DSP DEFEAT.)
For your reference
The tuner can pick up interference from DVD players. If this
occurs turn the DVD player off.
To change the AM frequency step
Press and hold [BAND] for about 3 seconds when AM band is
selected. (The frequency step changes from 9 kHz to 10 kHz per
step.)
To return to the previous step, press and hold [BAND] for about 3
seconds again.