Panasonic NV-SD430 Series Operating Instructions Manual page 7

11 INPUT SELECT
Selects the A1 or A2 external recording source.
12 DISPLAY
Changes the indication on the VCR display or on screen
display as follows.
->Clock-»Counter->Remaining Tape Time ma
13 G-CODE
Used for G-Code programming.
Ensure that VCR/TV switch is set to VCR.
14 INDEX Heed, mt
Used for the index search function.
15 REC@®
Starts recording.
16 REPEAT
For the repeat playback function.
17 > (PLAY)
Starts playback, "[>" is lit.
For the repeat playback function.
18 VCRITV
Selects the VCR mode or TV mode.
(NV-SD430A: No function.)
TV OPERATION
Set VCR/TV switch to TV for using POWER (b, the v
and A buttons and the numeric buttons.
19 POWER
Press to switch the TV from on to standby mode or vice
versa. In standby made, the TV is still connected to the
mains.
With some TV models, it may only be possible to
switch the TV to the standby mode using this button.
In this case, use AV or the Vv and A buttons to
switch the TV on.
Ensure that VCR/TV switch is set to TV.
20 Numeric Buttons
Selects programme positions (1-99) of the TV.
eEnsure that VCR/TV switch is set to TV.
21 AV
Selects TV input.
22VAN
Selects the required programme position (TV station) of
the TV.
eEnsure that VCR/TV switch is set to TV.
23 VOLUME — —alf+
Adjusts the volume of the TV.
B
>
2
2
3 ©