Panasonic NV-SD430 Series Operating Instructions Manual page 13

Auto Tuning Using the On Screen Display
Introduction Preparations
The VCR is tuned automatically by Plug in Auto Tuning. © Confirm that the TV is on and the VCR viewing channel is
However, Auto Tuning using the On Screen Display should selected.
be performed according to the following method if © Turn on the VCR and select any programme position
necessary. except Al or A2.
@ Press VCR/TV to select the VCR mode.
(NV-SD430EA only)
Set the VCR/TV switch to VER for : ; =)
using the numeric buttons. Operations On Screen Display
DCO CHL T ORD HO DOT TES ES OO SO DS DOG OEE ODLODOD00 2
™ 1 P r e s s =
Fase "eer SE cer inen MENU: ©
ee
ED
cer
a
S oooeoe ee Ke08 900080589987 09090 j
'@ 2 Select TUNER |
@ és PRESET.
'SEARCH'
: OooCTTHHHOFHCHHTHHTHAHHHHOHHAGHEOHOBHHEH OHM KOHOH HOD
S
|
3 Select AUTO TUNE H
and press < or >.
@»
—° AG
When Auto Tuning is
completed, the following
COUPLED display will appear on the
screen and programme
position 1 is selected. }
Notes:
© Auto Tuning searches for TV stations
from VHF minimum to UHF maximum
9C COR CRCARCT SH MOASHOSHEHOFTHHOFCHFHFVF HHH HKHOA :
and memorizes every tuned programme Channels that can be Received
position. Other programme positions are
rennin VHF "CATV UHE
@ Auto Tuning takes five or more minutes
to complete its search.
© If the VCR is not correctly tuned by Auto
Tuning, follow the procedure on the next
page.
© To rearrange the channels at the desired
channel positions, proceed with Manual
Tuning.
NV-SD430A 0-12 45-470MHz 28-69
NV-SD430EA 1-11 _ 21-69
13