Download Print this page

Fcc Note - Panasonic SH-FX65 Operating Instructions Manual

Wireless system and digital transmitter

Advertisement

co
x
o
cc
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
eDO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND THAT
NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
tUSE ONLY THE RECOMMENDED ACCESSORIES.
eDO NOT REMOVE THE COVER (OR BACK); THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT
INSTALL
OR
PLACE
THIS
UNIT
IN A BOOKCASE,
BUILT-
IN CABINET
OR
IN ANOTHER
CONFINED
SPACE.
ENSURE
THE
UNIT
IS WELL
VENTILATED.
TO PREVENT
RISK
OF ELECTRIC
SHOCK
OR
FIRE
HAZARD
DUE
TO OVERHEATING,
ENSURE
THAT
CURTAINS
AND
ANY
OTHER
MATERIALS
DO NOT
OBSTRUCT
THE
VENTILATION
VENTS.
The
following
mark
and symbols
are
located
on bottom
of the unit.
CAUTION
CAUTION:TO
REDUCE
THE
RISK
OF ELECTRIC
SHOCK
DO NOT
REMOVE
SCREWS.
NO USER-SERVICEABLE
PARTS
INSIDE.
REFER
SERVICING
TO QUALIFIED
SERVICE
PERSONNEL.
,_
The
lightning
flash
with
arrowhead
symbol,
within
an
equilateral
triangle,
is intended
to alert
the user
to the
presence
of uninsulated
"dangerous
voltage"
within
the
product's
enclosure
that
may
be of sufficient
magnitude
to
constitute
a risk of electric
shock
to persons.
,_
The
exclamation
point within
an equilateral
triangle
is
intended
to alert
the
user
to the presence
of important
operating
and
maintenance
(servicing)
instructions
in the
literature
accompanying
the appliance.
FCC Note:
This equipment
has been tested and found to comply with the lir'_litsfor a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection
against harmful
interference
in a residential
installation.
This equipment
generates,
uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the
instructions,
may cause harmful interference
to radio communications.
However,
there is no guarantee
that interference
will not occur in a particular
installation.
If this
equipment
does cause harmful interference
to radio or television reception,
which
can be determined
by turning the equipment
off and on, the user is encouraged
to
try to correct the interference
by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation
between the equipment
and receiver.
• Connect
the equipment
into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radiofrv
technician
for help.
FCC caution: To maintain
compliance
with FCC regulations,
shielded interface
cables must be used with this equipment.
Operation
with non-approved
equipment
or unshielded
cables may result in interference
to radio and TV reception. Any
changes
or modifications
not approved by the party responsible
for compliance
could void the user's authority
to operate this equipment.
This device complies
with Part 15 of the FCC Rules. Operation
is subject to the
following
two conditions:
(1) This device may not cause harmful
interference,
and
(2) this device ['/lust accept any interference
received,
including
interference
that
may cause undesired
operation.
Responsible
Party:
Panasonic
Corporation
of North America
One Panasonic
Way
Secaucus,
NJ 07094
Support Contact:
Panasonic
Consumer
Electronics
Company
Telephone
No.: 1-800-211-7262
_
WARNING:
To satisfy FCC RF exposure
requirements
for mobile transmitting devices,
a separation
distance
of 20 cm or ['/lore should
be maintained
between
the antenna of this device and persons during device operation.
To ensure compliance,
operations
at closer than this distance
is not
recommended.
The antenna used for this transmitter
must not be co-located
in
conjunction
with any other antenna or transmitter.
Marking sign is located on bottom of the unit.

Advertisement

loading