Panasonic TX-86PW100A Operating Instructions Manual page 23

§ § D 0
,1] CS iS
ri) it)
m
-ii) ® ta
Press the ASPECT
button
to select the different Aspect options. The
options available are
AUTO,
4:3, ZOOM, S-ZOOM, 16:9,14:9 and JUST.
AUTO
The AUTO position can be set to 4:3 or to
JUST. When a wide screen signal is
detected at the Video terminal the TV wiil
select the16:9 aspect ratio.
4:3
This option will display a standard 4:3
picture without any stretching or
compression. There wiil be vertical black
lines down either side of the oicture
S-ZOOM
j_\_/
1 It .1 Mi UV tM'.!
This option allows you to magnify part of the
picture. The coloured buttons let you
change the position of the magnified area.
Red V SIZE - Make picture Shorter.
Green VSiZE-f' Make picture Taiier.
Yellow' y POS - Move picture Down.
Blue VPOS+ Move picture Up.
S-ZOOM displays part of the picture at
greater magnification that the ZOOM mode
dess. The coloured buttons let you change
the size of the magnified area.
Red H POS - Move picture Lsft.
Green H POS + Move picture Right.
Yellow V POS - Move picture Down.
Blue V POS + Move picture Up.
16 : 9
15:9 Signal
The 16:9 option will display the picture at its
maximum size. Signals in the 4:3 format wiil
be stretched to fit the picture.
14 : 9
H H
H
The 14:9 option will display a 4:3 signal in
simulated wide screen. The picture is
slightly stretched. It is also slightly cropped
top and bottom.
JUST
JUST gives you a "best fit" option when
showing 4:3 on wide screen. The centre of
the picture is not affected but there is some
stretching at the edges.