Kick Starter Related Parts Inspection - Suzuki RMX450Z Service Manual

• Align the truncated splines and install the kick starter
lever to the shaft.
• Apply thread lock to the kick starter lever hole and
tighten it to the specified torque.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER "1303" or
equivalent)
Tightening torque
Kick starter lever bolt (b): 29 N·m (2.9 kgf-m, 21.0
lbf-ft)

Kick Starter Related Parts Inspection

Inspect the oil seal lip for wear and damage.
If any defects are found, replace the oil seal with a new
one.
IA02J1190044-01
(b)
IA02J1190045-01
BA02J21906016
IA02J1190051-01
Inspect the kick starter component parts for any
damage. If necessary, replace the defective parts with a
new one.
Inspect the kick starter idle gear and wave washer for
wear and damage. If any defects are found, replace the
gear with a new one.
Inspect the oil seal lip for wear and damage. If any
defects are found, replace the oil seal with a new one.
Starting System: 1I-18
IA02J1190052-01
IA02J1190053-01
IA02J1190047-01