Suzuki RMX450Z Service Manual page 209

Cam Chain / Cam Chain Tensioner
• Install the cam chain (1) to the crankshaft sprocket.
• Install the cam chain guide retainer (2) and tighten the
bolt to the specified torque.
Tightening torque
Cam chain guide retainer bolt (a): 10 N·m (1.0 kgf-
m, 7.0 lbf-ft)
(a)
• Install the cam chain tensioner (3) and tighten the bolt
to the specified torque.
Tightening torque
Cam chain tensioner bolt (b): 10 N·m (1.0 kgf-m,
7.0 lbf-ft)
Magneto Rotor / Starter Driven Gear
Install the magneto rotor/starter driven gear. Refer to
"Generator Removal and Installation" in Section 1J
(Page 1J-5).
1
2
IA02J1140091-02
3
(b)
IA02J1140092-01
IA02J1140093-01
Starter Idle Gear / Starter Torque limiter
Install the starter idle gears and starter torque limiter.
Refer to "Starter Torque Limiter / Starter Idle Gear /
Starter Clutch Removal and Installation" in Section 1I
(Page 1I-10).
Magneto Cover
• Install the dowel pin and new gasket (1).
CAUTION
!
Use new gasket to prevent oil leakage.
• Install the magneto cover. Refer to "Starter Torque
Limiter / Starter Idle Gear / Starter Clutch Removal
and Installation" in Section 1I (Page 1I-10).
Engine Mechanical: 1D-60
IA02J1140094-01
1
IA02J1140095-02
IA02J1140096-01