Table of Contents
Advertisement
4070VR/1080VR (En/K)
Preparations
¢Turn on the power to the related compo-
nents.
mponent
wa
ON/STANDBY
AON
: Sound from the speakers connected to the SPEAK-
ERS A terminals on the rear panel.
BON _ : Sound from the sneakers connected ta the SPFAK-
ERS B terminals on the rear panel.
A+BON
:Sound from both the speakers connected to the
SPEAKERS A and B terminals on the rear panel.
A+B OFF : No sound from the speakers
[Ise this setting when
listening with headphones
for stereo sound
in all
playback modes.
¢ When both SPEAKERS A and B are ON activating a surround made
turns SPEAKERS B OFF automatically.
The indicator for the speakers you want to use should be lit.
Soloct the source you desire.
The input sources change as shown below:
@ TUNER (Frequency display)
@ "PHONO™("PHONO"*)
@ "VIDEO1" ("SAT"*)
® "VIDEO2" ("LD"*)
& "VIDEO3" ("VCR™*)
@® "AV AUX"
@ "CD" ("CD"*)
@ "TAPE/MD" {("TAPE"*)
INPUT SELECTOR
Start playback
from the selected source.
* Once setup Codes are registered In Ine remote control, tne input name
display changes according to the name of the registered component.
Example: if you register a VCR at the VIDEO 1 jacks, "VCR1" appears
5 | Adjust the volume.
instead of "VIDEO 1".
-S
* When using the remote control after initial setup, any inputs that have
Decrease volume
Increase volume
Volume display
Advertisement
Table of Contents
