Advertisement
5 | Attach Cable Tray Hangers and End Caps
Align slots on cable tray and secure with 2 bolts from bottom. These hangers will
mount to workstation. Insert Beam Grommet Covers.
NOTE: End Caps (BTEC) are optional, follow the same install process with or
without end caps.
6 | Insert Beam Lock
Adjust cable tray to approximate width of the work surface. Insert screw through over-
lapping beam slots and into the locking screw and lever. Slightly tighten the screw.
NOT
fully tighten.
5
DO
Advertisement
