Table of Contents
Advertisement
LED
3 Blinks
Fast Blink
Slow Blink
Blue (Blinking)
Red (Solid)
AUDIO DSP ADJUSTMENTS USING THE REMOTE CONTROL
MEGA BASS
This setting is recommended when there is no dedicated subwoofer. Pressing
this button toggles an increase in the bass levels by approximately 10% from
50-100Hz.
BASS +/-
This is a broad bass change across the range of 80Hz to 500Hz by
approximately 1% for every button press, up to 10. When the limit is reached
in either direction, the front panel LED will blink quickly
TREBLE +/ -
This is a broad treble change across the range of 1kHz to 20kHz, by
approximately 1% for every button press, up to 10. When the limit is reached
in either direction, the front panel LED will blink quickly
RESET BUTTON
This button will reset all audio settings back to factory defaults.
VOICE (DIALOG)
This button will enable a high pass filter at 100Hz and a low pass filter at
12KHz to allow for more dialog detail and clarity. In this mode, you may also
customize the bass and treble or enable Mega Bass as desired.
STATUS
IR command received
Volume has reached maximum or
minimum setting
Audio is muted
Bluetooth pairing mode is active
Standby mode
AVA-Series Amplifiers
USING THE MINI-AVR
9
Advertisement
Table of Contents
