Panel Facilities - Pioneer A-300R Operating Instructions Manual

PANEL FACILITIES
(FRONT PANEL)
@ POWER switch/indicator
Press to turn power to the unit ON and OFF.
The indicator lights when the power is ON and goes off when
the power is OFF.
@ Remote control sensor window
@ TAPE 2 MONITOR switch/indicator
Use when there is an adaptor component (graphic equalizer,
etc.) or cassette deck connected to the TAPE 2/MONITOR
{ADPT) terminals.
Off:
Indicator goes out when not in use.
On:
Indicator lights when using the adaptor component or listen-
ing to the cassette deck.
NOTE:
® When no connections are made to the TAPE 2/MONITOR
(ADPT) terminals, or when they are not in use, be sure to
set this switch to the off position. {No sound will be heard
if itis set to the on position.)
® To monitor during recording using a 3-head deck, use the
TAPE 2/MONITOR (ADPT) terminal. Even if the 3-head deck
is connected to the TAPE 1/DAT terminal, monitoring dur-
ing recording cannot be performed. (See page 8.)
6
<ARB7034>
@ INPUT SELECTOR switch
Use to select the playback source.
TAPE 1/DAT:
For playback with a cassette deck or digital audio tape deck
connected to the TAPE 1/DAT terminals.
TUNER:
For AM or FM broadcast reception with a tuner.
cD:
For compact disc playback with a CD player.
LINE:
Set to this position when listening to a program from a com-
ponent connected to the LINE terminals
PHONO:
For record playback with a turntable.
® BALANCE control
Should normally be left in the center position. Adjust the bal-
ance if the sound is louder from one of the speakers. If the
right side is louder, turn toward the L (left) position and if the
left side is fouder, turn toward the R (right) position.
© VOLUME control
Use to adjust the volume level.
@ PHONES jack
When using headphones, insert the plug into this jack.