Table of Contents
Advertisement
CONNECTING THE SPEAKER CORDS
1.
Strip aff the viny! covering and twist the tip of the wire
COPE
10mm
2.
Loosen the knob and insert the wire core into the termi-
nal hole.
3. Tighten the knob to fix the wire core in place.
NOTE:
Do not allow any of the cord conductors to protrude from the termi-
nals or touch any other conductors. Malfunctioning or breakdown
may occur when conductors come into contact with each other.
NOTE:
Do nat remove studs. Removal of the studs from the out put termi-
nals may lead to a hazardous connection with the mains supply if the
speaker cord is terminated with Banana plugs (U.K. model only).
Studs (4 pieces)
Speaker Impedance
When speaker systems are connected to only the SPEAK-
ERS terminals, such speakers should have a rated imped-
ance in the range of 4-16 Q.
CONNECTING THE INPUT/OUTPUT CORDS
Connect the white plug to the L (left) channel, and the red
plug to the R (right) channel. Be sure to push the plugs in
securely.
Left channel sy
White plug mS ))
; ae
a @,
Right channel
4
Red plug
5
<ARB7034>
Advertisement
Table of Contents
