Table of Contents
Advertisement
Chapter 1
Decimal Tab
When the TAB Key together with the CODE Key is
pressed, the decimal points can be aligned at the set
tab position. The decimal tab function can be used not
only with numbers but also with symbols.
•Operation
Example:
+
1
Set a tab at the position
where the decimal point is
to be printed.
2
Press the CODE Key and
the TAB Key, this will
move the carriage to the
position where the deci-
mal point will be printed.
The following will appear
on the LCD Display to
indicate the unit is waiting
for input.
DECIMAL TAE:
3
Enter the integral part of
the number.
The entered number is
displayed on the
LCD
Display.
Tab position
Tab position
i
January
I
February
$3,220100
1,007.31
•When the number is only an integral part and there
is no decimal point, use the TAB Key, the RETURN
Key, or the CODE Key and the T A B Key to execute
printing.
•When a large number of characters is to be entered
and any further entry will go beyond the left margin
or will be superimposed over already
printed
characters, the buzzer sounds and character input is
no longer accepted.
•To cancel the Decimal Tab Mode, press the
Key
and then press the REPEAT Key to delete all the
entered characters until the buzzer sounds. Then
press the
Key again.
5
When the decimal point
(period) is entered, print-
ing will be executed so
that the decimal point is
printed at the tab posi-
tion.
Type the decimal portion
of your input.
Repeat the above steps (2 to 5)
to type lists of statistics.
Advertisement
Chapters
Table of Contents
