Table of Contents
Advertisement
2-2
CORRECTION
Chapter 2
a .
Automatic Correction
This unit has a one line correction memory so you can
delete the characters on the current line automatically
with one simple operation.
BACK I
EXP
SPACE I
Space Bar
Use the BACK SPACE
Key, the EXP Key, or
the Space Bar to move
the carriage to the posi-
tion of the character to be
corrected.
5
When the RELOC Key is
pressed, the carriage re-
turns to the end of the line
and typing can be con-
tinued.
2
3
Press t h e < E Key.
The character will be de-
leted.
At this time, to continue
automatic
correction
press the REPEAT Key.
This will cause the pre-
viously printed characters
on the line to be deleted
one at a time until the
REPEAT Key is released.
Type the correct charac-
ter.
• Directly after printing a character at the end of the
line, the carriage will move back and the character
will be deleted automatically when the
Key is
pressed.
»Automatic Correction is not possible after the
RETURN Key has been pressed. In this case,
Manual Correction must be performed.
»When several characters have been printed super-
imposed, only the character printed last will be
deleted automatically.
Advertisement
Chapters
Table of Contents
