Advertisement
Optional SRP-70BK (DSP extension board kit)
The SRP-70BK is a DSP expansion board kit for the SRP-F700 digital audio processor.
The SRP-F700 digital audio processor uses, as standard, 20 high speed DSP ICs
corresponding to 96 kHz sampling frequency. Mounting the SRP-70BK means adding
For details of the basic operations of the SRP-F700 not described in this manual, refer to the
manual for the SRP-F700.
Mode B
Not provided as standard.
Available by mounting the SRP-70 BK.
The block configuration of mode B is the same as that of mode A.
However, the 121 band (1/12 oct steps) graphic equalizer block enables the frequency to be
set more minutely.
Mode C
In the notch filter block, the number of settable notch filters will expand from the standard
12 bands to 31 bands.
Mode D
The crossover block using the linear phase FIR filter will change from the standard 2 WAY
specifications to 4 WAY specifications.
Upon mounting the SRP-70BK to the SRP-F700, the modes of the SRP-F700 will change as
follows.
Crossover mode....... Mode A
Same as before mounting.
ssh Mode B
Available on mounting.
mater, Mode C
Some functions are expanded on mounting.
Sats Mode D
Some functions are expanded on mounting.
Distribution mode... Mode E
Same as before mounting.
Advertisement
