Table of Contents
Advertisement
at=rere) collate]
Power zoom lever
1 Set the STANDBY/LOCK switch to
STANDBY.
The REC lamp (red)
lights up during recording.
AUTO FOCUS ON/OFF button
Press START/STOP button to start
recording.
To zoom
;
To keep.a subject in focus
Slide the power zoom lever towards T for telephoto (subject
After you focus on a subject, press the AUTO FOCUS ON/
appears closer) or W for wide-angle (subject appears farther
OFF button to set the video camera recorder to manual focus
away). You cannot change the zooming speed of the video
mode.
camera recorder, even if your video camera recorder is
-=—Even if fish swim between the video camera recorder and the
adjustable.
subject, you can still keep the subject in focus.
O>)
Note on CCD-FX310/FX410
The AUTO FOCUS ON/OFF button is not operative for these
wet
models.
|
i
Set the video camera recorder to auto focus mode.
Wide-angle
Telephoto
?
To stop recording
When you set the power zoom lever to the full wide-
angle position (macro), specks or bubbles on the front
glass may come into focus. In this case, slide the power
zoom lever a little towards T and return towards W.
Press the START/STOP button.
12
Advertisement
Table of Contents
