Advertisement
Channels applicable to 420-450 MHz
Rx Ch 31
-
444.5
Rx Ch 32
-
440.05
Rx Ch 33
-
448.975
Rx Ch 34
-
440.2
Rx Ch 35
-
431.9
Rx Ch 36
-
444.6
Rx Ch 37
-
440.1
Rx Ch 38
-
448.9
Rx Ch 39
-
440.15
Rx Ch 40
-
431.8
If the encoder is rotated clockwise, the logical channel will increment in steps of one and
conversely decrement for anti- clockwise rotation. To increase the steps, hold either the
DGT key or the ST key while rotating the encoder. The ST key makes the step size tens
and the DGT key hundreds.
If the 'F' key is pressed, the portable will cycle through the various test modes.
Mode 1.
chnnnn -
Mode 2.
MIKE
Mode 3.
FFSK
Mode 4.
DTMF
Mode 5.
BEEP
Mode 6.
LPWR
Mode 7.
HPWR -
Mode 8.
SL
Mode 9.
L0
Mode A.
BA
Note that if a setting is changed, the value will only be permanently saved WHEN THE 'F'
KEY IS PRESSED TO CHANGE MODE.
Mode 1.
chnnnn -
This is the mode in which Test Mode started. If the 'F' key is pressed past the end of
the tests, it will cycle back to this mode.
Mode 2.
MIKE
Connect the portable to a suitable R.F transmitter test set. Press the PTT to
transmit.
speech deviation. Note that the small digits on the left of the display will
show the encoder value.
KENWOOD TRUNKED PORTABLE - Test Modes Ver 0.99
MHz
Tx Ch 31
MHz
Tx Ch 32
MHz
Tx Ch 33
MHz
Tx Ch 34
MHz
Tx Ch 35
MHz
Tx Ch 36
MHz
Tx Ch 37
MHz
Tx Ch 38
MHz
Tx Ch 39
MHz
Tx Ch 40
Channel Select
-
Speech deviation adjustment
-
FFSK deviation adjustment
-
DTMF deviation adjustment
-
Beeps and Rings volume level
-
Low Power transmitter setting
High Power transmitter setting
-
Squelch Setting
-
L0/L2 Threshold
-
Battery Voltage Calibration
Channel Select
-
Speech deviation adjustment
While transmitting, the encoder will increase or decrease the
-
432.0
MHz
-
425.0
MHz
-
431.99375
MHz
-
431.9
MHz
-
MHz
440.2
-
MHz
432.1
-
425.1
MHz
-
431.9
MHz
-
431.8
MHz
-
440.15
MHz
Page (6)
Advertisement
