Table of Contents
Advertisement
2
Press a programmed HomeLink
3
Within 1 minute of pressing the HomeLink
has stopped, press the "Learn" or "Smart" button on the garage door opener motor.
Within 5 seconds of the establishment of 2-way communication, both garage door opera-
tion indicators will flash rapidly in green. Additionally, the light on the garage door opener
motor will blink twice, indicating that 2-way communication is enabled.
Operate the HomeLink
This function is only available if the garage door opener motor used is a compatible device.
To check device compatibility, refer to www.HomeLink.com.
Vehicles with auto anti-glare inside rear view mirror
Vehicles with Digital Rearview Mirror
Press the appropriate HomeLink
The HomeLink
garage door is shown by the indicators as follows.
● Orange (flashing): Currently opening/closing
● Green: Opening/closing has completed
● Red (flashing): Feedback signals cannot be received
● The indicators can operate within approximately 820 ft. (250 m) of the garage door.
However, if there are obstructions between the garage door and the vehicle, such as
houses and trees, feedback signals from the garage door may not be received.
83
®
®
®
indicator light will turn on. The status of the opening and closing of a
®
button to operate a garage door.
®
button, after the garage door operation
A
Opening
B
Closing
Opening
A
B
Closing
button.
Advertisement
Table of Contents
