Changing The Print Server Configuration - Citizen CT-S310IIET Manual

Introduction

1-5-2. Changing the Print Server Configuration

By clicking "Edit" button, screen is changed for the page to change the network settings.
[Back] button: The page moves back to the page to check the current network settings.
[Cancel] button: The entry data on this page is canceled.
[Save] button: The entry data on this page is saved and move the page below then the
printer reboots after few seconds.
When the operation is complete, the printer restarts automatically.
When the network setting is set to automatically obtain the IP address from the DHCP
server, the IP address assigned may be different from the previous one.
Warning
10