Table of Contents
Advertisement
Charge Rate
Select Charge Rate to set the currency and price per unit which your
CMD-C1 uses to calculate the call cost.
To set the Charge Rate
1 Select Charge Rate from the Time, Cost menu.
2 Enter your PIN2 code at the prompt.
1
3 Select Unit (or Currency) and press the Jog Dial to confirm.
4 To enter the Currency, use the keypad to enter a monetary
denomination (up to three characters) and press the Jog Dial to
confirm. (In case of unit, you return to the previous menu.)
1
5 Enter the price per unit (press the * or # key to enter a decimal
point).
6 Press the Jog Dial to confirm.
7 Press the Jog Dial or
Charge Limit
Select Charge Limit to set a unit figure at which your CMD-C1 will not
allow any more phone calls to be made. (If you have selected Unit in the
Charge Rate Menu (see above), enter the Unit value. In case of Currency,
enter the Currency value.)
To set the Charge Limit
1 Select Charge Limit from the Time, Cost menu.
2 Enter your PIN2 at the prompt.
1
3 Enter the price limit. (Unit or Currency, see above.)
4 Press the Jog Dial to confirm.
5 Press the Jog Dial or
Note
Reset the Call Cost counter or enter a higher limit in order to be able to make phone
calls again.
SECURITY
NETWORK SERVICES
/
(or
) to exit.
c
(or
c
) to exit.
TIME, COST
?
41
GB
Advertisement
Table of Contents
