Table of Contents
Advertisement
Enabling/Disabling the PIN Code
When the PIN code is enabled, your CMD-C1 prompts you to enter
the PIN code each time you turn on the phone.
1 Select PIN in the Security Menu and press the Jog Dial to
1
2 Select On/Off to enable/disable the PIN code.
3 Enter the PIN code and press the Jog Dial to confirm.
4 The PIN is enabled/disabled.
Changing the PIN Code
You can change your PIN code to any 4-8 digit number. Your PIN
code can only be changed if the PIN Control is switched on.
1 Select PIN in the Security Menu.
2 Select On.
1
3 Enter the old PIN code at the prompt and press the Jog Dial (or
4 Enter your new PIN code (4-8 digits) and press the Jog Dial to
5 Repeat the new PIN entry for verification and press the Jog Dial
1
Note
If the PIN code is disabled, the risk of unauthorised use of your CMD-C1 is greater.
The disabling of the PIN control is SIM card dependent. Contact your Network
Operator/Service Provider for details.
GB
34
confirm your choice.
# key) to confirm your entry.
confirm.
to confirm. If successfully verified, the new PIN is effective
immediately.
SECURITY
NETWORK SERVICES
/
TIME, COST
?
Advertisement
Table of Contents
