Table of Contents
Advertisement
LIFTING/LOWERING THE MOTOR HEAD
1.
To lift Motor Head: Push the locking lever to the unlock position and lift the head. Once
lifted, the lever will automatically go back in the lock
2.
To lower Motor Head: Push the locking lever to unlock and gently bring the head down.
The locking lever will automatically go back in the lock
Before mixing, test lock by attempting to raise Motor Head.
NOTE: Motor Head should always be in locked position when using the Stand Mixer.
***Locking option is available on select models.
***
position to keep the head lifted.
***
position when the head is down.
9
Advertisement
Table of Contents
