Operations And Functions - Daewoo KOR-63ND5S Service Manual

OPERATIONS AND FUNCTIONS

1. Connect the main lead to an electrical outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray must always
be in place during cooking.
3. Close the door securely.
4. When the oven door is opened, the light turns off.
5. The oven door can be opened at any time during operation by pressing the door release button on the control panel.
The oven will automatically shut off. To restart the oven, close the door and then press START button.
6. Each time a button is pressed, a BEEP will sound to acknowledge the press.
7. The oven automatically cook on full power unless set to a lower power level.
8. The display will show : 0 when the oven is plugged in.
9. Time clock returns to the present time when the cooking time ends.
10. When the STOP/CLEAR button is pressed during the oven operatiion, the oven stops cooking and all information
retained.
To erase all information (except the present time), press the STOP/CLEAR button once more. If the oven door is opened
during the oven operation, all information is retained.
11. If the START button is pressed and the oven does not operate, check the area between the door and door is closed
securely. The oven will not start cooking until the door is completely closed or the program has been reset.
Make sure the oven is properly installed and plugged into the electrical outlet.
Wattage output chart
The power level is set by pressing the POWER button. The chart shows the display, the power level and the percentage of
power.
Press POWER button
Once
twice
3 times
4 times
5 times
Power level (Display)
P-HI
P-80
P-60
P-40
P-20
8
Approximate Percentage of Power
100%
80%
60%
40%
20%