Operations And Functions - Daewoo KOR-632G0S Service Manual

OPERATIONS AND FUNCTIONS

1. Connect the m ain lead to an electrical outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray m ust always
be in place during cooking.
3. Close the door securely.
4. W hen the oven door is opened, the light turns off.
5. The oven door can be opened at any tim e during operation by touching the door release button on the control panel.
The oven will autom atically shut off. To restart the oven, close the door and then touch START.
6. Each tim e a pad is touched, a BEEP will sound to acknowledge the touch.
7. The oven autom atically cook on full power unless set to a lower power level.
8. The display will show :0 when the oven is plugged in.
9. Tim e clock returns to the present tim e when the cooking tim e ends.
10. W hen the STOP /CLEAR pad is touched during the oven operation, the oven stops cooking and all inform ation retained.
To erase all inform ation (except the present tim e), touch the STOP/CLEAR pad once m ore. If the oven door is opened
during the oven operation, all inform ation is retained.
11. If the START pad is touched and the oven does not operate, check the area betw een the door and door is closed
securely. The oven will not start cooking under the door is com pletely closed or the program has been reset.
M ake sure the oven is properly installed and plugged into the electrical outlet.
W attage output chart
The power level is set by pressing the Power pad. The chart shows the display, the power level and the percentage of
power.
Touch Power pad.
O nce
Tw ice
3 tim es
4 tim es
5 tim es
6 tim es
7 tim es
8 tim es
9 tim es
10 tim es
11 tim es
Pow er level (Display)
P -H I
P -90
P -80
P -70
P -60
P -50
P -40
P -30
P -20
P -10
P -00

Approximate Percentage of Pow er
100 %
90 %
80 %
70 %
60 %
50 %
40 %
30 %
20 %
10 %
0 %