Other Information
Programming the
Remote Control
To check if the code number
works, after step 5 aim the TV's
remote control at the component
and press the POWER button that
corresponds with that component. If
it responds, you're done. If not, try
using the other codes listed for your
component.
42
VHS VCR
—-VTR3
_
301
DVD Player
DVD/MDP
751
remote control.
Press CODE SET.
Move the slide switch to the desired input.
Enter the three-digit code number.
Press ENTER.
In some rare cases, you may not be able to operate your
equipment with the supplied remote control. In this case, use the
equipment's own remote control unit.