Sony FD Trinitron WEGA KV-32XBR400 Operating Instructions Manual page 12

Installing the TV
Cable Box and Cable
For this set up, you can switch between scrambled channels (through
your cable box), and normal (CATV) channels by pressing ANT on the
remote control.
Cable box AUX
IN| (c eC
—ryp
Rear of TV
In S —
TO CONVERTER
4
' Signal
VHF/UHF
———i6)))
75-ohm coaxial cable (not supplied)
CATV cable (unscrambled channels)
) Your Sony remote control can be programmed to operate your cable box (see
"Programming the Remote Control" on page 42).
When using Favorite Channel or Twin View, you cannot view the AUX input in the
window picture.
Pressing ANT switches between these inputs.
@ If you are connecting a cable box through the AUX input and would like to switch
between the AUX and normal (CATV) input you should consider using the Channel Fix
feature (see page 30).