Technics SL-PD887 Operating Instructions Manual page 6

he supplied accessories
ord.
For Australia
ind N.Z.)
(For others)
[ I Stereo connection
cable.
i 1
Power plug adaptor.1
(Not supplied for United
Kingdom, Europe,
Australia and N.Z.)
(RJA0036-K)
nsmitter.
{RJA0019-2K)
I I
Batteries
{SJP2249-3)
(RAK-SL404WH)
(SJP5213-2)
For instructions on preparation and
operation of the remote control transmitter,
refer to the separate booklet titled "How to
use the remote control transmitter".
{UM-4. "AAA". R03)
hanger to your audio system, make sure
anger and all other system components
alow shows the AC power supply cord
household AC outlet, if the amplifier (or
■ i th an AC outlet, connect the cord to that
le AC outlet differs according to area.
(For United Kingdom only)
BE SURE TO READ THE CAUTION FOR AC
POWER SUPPLY CORD ON PAGE 3
BEFORE THE FOLLOWING CONNEC¬
TIONS.
(For areas except United Kingdom, Europe, Australia
and N.Z.)
Set the voltage selector to the voltage setting for the area
in which the unit will be used.
[Use a minus (—) screwdriver}
If the power supply In your area is 117 V or 120 V, set to
the "127 V" position.
Note that this unit will be seriously damaged if this setting
is not made correctly.
If the power plug will not fit your socket,
use the power plug adaptor (included).
(For areas except Australia and N.Z.)
Insertion of Connector
Even when the connector is perfectly in¬
serted, depending on the type of inlet used,
the front part of the connector may jut out
as shown in the drawing.
However there is no problem using the unit.
Connector
Approx. 6 mm
^,4ppl lance inlet
:ept United Kingdom,
ilia and N.Z.)
Household
AC outlet