Technics SL-PD887 Operating Instructions Manual page 11

You can select up to 32 selections that you do not want to hear
and put them in the changer's memory. Then you can enjoy se¬
quential. one disc random, or full random play of only your
favorite tracks.
PROGRAM MODE [In the stop mode]
Press PROGRAM MODE
twice so that the "DEL" in¬
dicator illuminates.
Each time the button is pressed, the
display will change in the following
order:
PGM — DEL — (off).
Illuminates
W
oaci
9
IIC
2
naci 04C4 ones
OOOOO
Press the disc button (1 -
For example:
To delete disc 3, press DISC 3.
5).
The "AL" indication shows that all the tracks
on the disc are selected.
To delete by means of disc numbers only,
repeat the above operation. (The count will in¬
crease by one for each operation.)
. *
,,
0 >10
CDCD
UCDa
Press the numeric button(s)
to specify the track number.
For example:
To delete track number 20, press
>10, then 2, and then 0.
ic'
f/ / ,
Mo.
/
1
Specified track number Order you have
entered
Repeat steps 2 and 3 until you have
completed the desired entry.
If you enter non-existing disc(s) or track(s) soon after
the loading drawer is closed or when it is open, the
corresponding indicator illuminates and the entry is
included in the count. In the play mode, the changer
will cancel the non-existing entry.
If you attempt a 33rd selection, the " -F" (full) indica¬
tion will be displayed.
Press ^ to start play.
To enter additional selections to be
deleted during play, repeat steps 2
and 3.
For random play while deleting unwanted tracks
[Proceed through step 4 above, and then:]
To activate one disc random play, press RANDOM MODE.
To activate full random play, press RANDOM MODE twice.
To clear the entire contents to be deletea
[In the stop mode]
Press ■.
To cancel delete mode
PROGRAM MODE [in the stop mode]
I Press PROGRAM MODE.
The changer will return to sequential pla
mode.
The contents to be deleted will remain stored in the memory unt
they are cleared, even after the delete mode is canceled.
Therefore, after using delete play, it is possible to cancel th
delete mode and use another play mode (except program pla>
and then still use the same delete play again at a later time.
In addition, if the disc is replaced with another one, delete pla
will be carried out using the new disc. If non-existing entries oc
cur at this time, they will be canceled.
For your reference:
The delete mode and the contents to be deleted will remait
stored in the memory even after the unit is switched off.
However, if the power cord is unplugged or the power supply
i
otherwise interrupted for an extended length of time, the cor
tents of the memory will be erased.