Sony DCR-TRV8 Operating Instructions Manual page 27

'laying back a tape
B mPJ_ _Jm
To operate control buttons, set the POWER switch to VTR.
To view a still picture (playback pause)
Press II during
playback.
To resume
playback,
p ress II or I_.
To advance the tape
Press I_ in the stop mode. To resume normal playback, press _'.
To rewind the tape
Press 491 in the stop mode. To resume normalplayback, press I_.
To change the playback direction
Press _ on the Remote Commander during playback to reverse the playback direction.
Toresumenormal playback, press P.._.
To locate a scene monitoring the picture (picture search)
Keep pressing _ or J)4_ during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while advancing or
rewinding the tape (skip scan)
Keep pressing q_l while rewinding or _ while advancing the tape. To resume
rewinding or advancing, release the button.
To view the picture at slow speed (slow playback)
Press I_ on the Remote Commander
during playback. For slow playback in the reverse
direction, press _, then press I,_ on the Remote Commander. To resume normal
playback,
press I_.
To view the
picture
at double
speed
Press ×2 on the Remote Commander during playback. For double speed playback in the
reverse direction, press <:, then press x2 on the Remote Commander. To resume
normal playback, press I_.
To view the picture frame-by-frame
Press II1_ on the Remote Commander
in the playback pause mode. For frame,y-frame
playback in the reverse direction, press qlll. To resume normal playback, press I1_.
To search the last scene recorded (END SEARCH)
Press END SEARCH in the stop mode. The last
5 seconds of the recorded section plays back and stops.
End Search
When you use a tape without cassette memory, the end search function does not work
once you eject the cassette after you have recorded on the tape.
When you use a tape with cassette memory, the end search function works even once
you eject the cassette.
In the various playback modes
Sound is muted.
When the playback pause mode lasts for 5 minutes
Your camcorder automatically enters the stop mode. To resume playback, press I_.
Slow playback
The slow playback can be performed smoothly on your camcorder; however, this
function does not work for an output signal from the _ DV IN/OUT jack.
When you play back a tape in reverse
Horizontal noise appears at the center or top and bottom of the screen. This is not a
malftmction.
m
D"
Ig-
I
27