Preparation; General Notes; Connecting To Audio Equipment - Analogue - Philips SACD1000 Instructions For Use Manual

Preparation

General notes

- Depending on your amplifier/receiver/Stereo System,
there are various ways to connect the player. These are
explained in the section below.
- For some connections, settings for digital and/or
analogue output are required. These settings have to be
made in the 'Personal Preferences' menu which is only
accessible via your TV screen. In these cases you will
need to connect the player to the TV as well.
- Please refer to your amplifier/receiver/Stereo System,
TV and any other User Manual(s) as necessary to make
the optimal connections.
Caution: Do not connect the player's audio
output to the phono input of your audio system.
Connecting to audio equipment -
analogue
Connecting to an amplifier/receiver
equipped with two channel analogue
stereo
Connect the audio Left and Right outputs for Front
speaker connection (1) to the corresponding
sockets on your amplifier, receiver or stereo system
using the audio cable supplied.
AMPLIFIER
MAINS
VOLTAGE SELECTOR RIGHT
220-240V 100-120V
FILTER
1 2 3
GND
DIGITAL AUDIO OUT
Dolby Digital/
DTS/MPEG only
OPT OUT DIG OUT
18 PREPARATION
1
MULTICHANNEL AUDIO OUT
LEFT RIGHT SURR. LEFT SURR. SUBW CENTER
STEREO OUT
1
2
L (CVBS) ( Y/C )
R
VIDEO OUT C C Y S-VIDEO
AUDIO R B
Connecting to a Multi-channel
Audio/(Video) receiver with 6 connectors
This SACD player contains a multi-channel decoder. This
enables playback of SACDs recorded in Multi-channel.
You only need to select Multi-channel using the Sound
Mode key.
1 Connect the audio Left and Right outputs for Front
speaker connection (1) to the corresponding input
sockets on your receiver using the audio cable
supplied.
2 Connect the audio Left and Right outputs for
Surround speaker connection (2) to the
corresponding inputs on your receiver using an
optional audio cable.
3 Connect the audio outputs for Center speaker and
Subwoofer connection (3) to the corresponding
inputs on your receiver using an optional audio
cable.
Note: If the subwoofer is equipped with its own amplifier, the
Subwoofer connection should be connected directly to the
subwoofer.
AMPLIFIER
1
MAINS
RIGHT LEFT
VOLTAGE SELECTOR
220-240V 100-120V
FILTER
1 2 3
GND
STEREO OUT
DIGITAL AUDIO OUT
Dolby Digital/
DTS/MPEG only
R L (CVBS)
VIDEO OUT
OPT OUT DIG OUT AUDIO
2 3
MULTICHANNEL AUDIO OUT
RIGHT SURR. LEFT SURR. SUBW CENTER
1
2
( Y/C )
C C Y S-VIDEO
R B