Table of Contents
Advertisement
Camera Recording
'RaCercine
vía (AP.
View recording scene on EVF.
VISION
ADJUSTMENT
-
Built-in Twin
Capsule 2-Way
Microphone
SPEED
EL,
SP/SLP
1 4
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts e panasonic.com
Before you begin...
* Connect Camcorder to power source.
* Insert cassette with record tab (page 10).
1 Set POWER to
CAMERA.
Lens Cover opens.
Power Lamp lights.
* Be sure POWER
is fully turned to
CAMERA position.
* EVF turns on/off by the POWER switch.
EVF Indication
(Record/Pause mode)
2 Look into EVF and adjust VISION
ADJUSTMENT to your eyesight.
3 Hold down TAPE SPEED for about 1
second to change tape speed to SP/SLP
(page 10).
Tape speed
4 Press RECORD/
7
PAUSE to start or
RECORD
pause recording.
EVF Indication
(Record mode)
5 Set POWER to
OFF when finished.
* To remove the cassette, slide the TAPE
EJECT switch (page 10).
Note:
e When Camcorder is aimed at excessively
bright objects, or bright lights, a vertical bar
may appear in the picture. This is normal for
the CCD pick-up. Try to avoid this when
possible.
Advertisement
Table of Contents
