Cleaning The Debris Filter - Samsung WF231 Series User Manual

F
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displaye&
t. Open the filter cover by pressing and pulling the handle "\
of the filter cover with your finger.
2,
3.
4,
Holding the drain cap, pull the drain tube that _ Step1 steP2
is hooked on the guide hook to the front.Do _:,_
not pull the drain tube with excessive force. ........
Place a bowl under the washing machine
thet° catch any remaining water. Then,drain tube with one hand, and turnh°ldthe ..... _!_ p
emergency drain cap counter clockwise with :_.__
the other hand to separate it from the drain " _'
tube.
Drain the remaining water completely.
5. Pull out the debris cap and debris filter assembly.
Debris filter ca
6. Wash any dirt or other material from the
debris filter. Make sure the drain pump
propeller behind the debris filter is not
blocked.
}
Debris,i,,er : ;ebris,i.er
cap
7. When you have finished cleaning the filter, insert the debris
debris filter cap clockwise until the indicator on the debrisCap and filter assembly back into the washer. Turn the
filter cap is in the 12 o'clock position, pointing to the ,,--_....... _it
i n d ic at o r o n t h e was h e r. i_i _%_ ,4_/_
8. Re-attach the emergency drain cap to the drain tube, and
then hook the tube to the hook guide.
9. Re-install the filter cover.
26 cleaning and maintaining your washer
WF231ANW-02832D EN.indd Sec7:26 2011-04-18 10:38:26 I