Advertisement
Installation
Warning
IF YOU ARE DISCARDING AND OLD
APPLIANCE THAT HAS A LOCK OR
CATCH ON THE DOOR, PLEASE
ENSURE THAT IT IS MADE
UNUSABLE TO PREVENT YOUNG
CHILDREN BEING TRAPPED INSIDE.
Depending upon the position which you
choose for your appliance, you may wish
to reverse the way in which the door
opens. To do this, refer to instructions
on page 6.
For this appliance to work efficiently,
it should be located away from heat
sources, e.g. cookers, radiators, boilers,
direct sunlight etc. This also includes
locations or rooms where the ambient
temperature reaches above 32 degrees C
or drops below 16 degrees
(e.g. conservatories).
You should also ensure that air can
circulate freely around the back and the
top of the cabinet. There must also be at
least 50mm (2") distance between the
top of the cabinet and any overhanging
kitchen furniture. Ideally, the appliance
should not be positioned beneath
overhanging furniture. There should also
be a gap of 25mm either side of the
appliance. Do not obstruct the space
underneath. The back of the cabinet may
be placed close to the wall but must
not touch it. DO NOT install in places
with restricted ventilation.
Adjust the level of the appliance by
screwing out the adjustable foot, or feet,
at the bottom of the cabinet using
your fingers or a spanner, (see fig. 1).
Electricity Supply
The appliance is for operation on a
220/240 V. 50 Hz supply, so be sure that
your electricity supply voltage is within
the range marked on the nameplate
located inside the cabinet.
Earthing
WARNING: THIS APPLIANCE MUST BE
EARTHED. The manufacturer declines
any liability should this safety measure
not be observed.
If the plug that is fitted to your appliance
is not suitable for your socket outlet, it
must be cut off and the appropriate plug
fitted. The cut off plug should be disposed
of to prevent the hazard of electric shocks
in case it should be plugged into a 13 Amp
socket in another part of your home.
Fig. 1
3
Advertisement
