Care And Cleaning - AEG TR7C40588 User Manual

One of the symbols appears on the display:
- Maximum dryness
- Extra dryness
- Standard dryness
5. Touch the Start/Pause button repeatedly
until you reach the desired dryness level.
Dryness level
Maximum dry‐
ness
Extra dryness
Standard dry‐
ness
6. To memorise the setting touch and hold
down the Knitterschutz and Trockenzeit
buttons at the same time for
approximately 2 seconds.
9.3 Deactivating the tank indicator
The water container indicator is activated by
default. It illuminates at the end of the drying

10. CARE AND CLEANING

10.1 Cleaning the filter
At the end of each cycle the
comes on the display and you must clean the
filter.
The filter collects the lint during the
drying cycle.
To achieve the best drying performances
clean the filter regularly , clogged filter
lead to longer cycles and energy
consumption increase.
Use your hand to clean the filter , and if
necessary , a vacuum cleaner .
18 ENGLISH
Display symbol
Sieb symbol
cycle or during the cycle if the water reservoir
is full. If the draining kit is installed the water
container is drained automatically and the
indicator can be deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Wait approximately 8 seconds.
3. Select 1 of the available programmes.
4. Touch and hold down Signal and
Trockenzeit buttons at the same time.
One of 2 configurations is possible:
• the Behälter indicator:
symbol
container indicator is permanently
activated
• the Behälter indicator:
symbol
container indicator is permanently
deactivated
CAUTION!
Avoid the use of water to clean the filter.
Instead throw away lint in the dustbin
( avoid dispersion of plastic fiber in water
ambient).
1. Open the door. Pull the filter up.
2. Push the hook to open the filter.
is on if the
appears - the water
is off if the
appears - the water